This MircoALF has been designed for all those who want to switch the indicators, driving lights, warning lights and two extra flashing beacons comfortably and in the smallest possible space (e.g. in an articulated lorry). All functions are switched via a proportional channel of the receiver. In addition, the high-quality output stages with a load capacity of up to 500mA can also switch several LEDs or other loads.
Despite the small dimensions, the solder pads are sufficiently dimensioned so that the cables can be soldered on easily.
The LEDs to be connected must be provided with a series resistor for current limitation. However, our 3.7 Volt LEDs can always be used (such as LR-K, etc.), which already have the required resistor integrated in the cable. This way, the installation of light functions is not only reserved for professionals.
TECHNICAL SPECIFICATIONS:- Operating voltage in V: 2.7 - 5
- Output current per output in mA: 500
- Dimensions in mm: 12 x 7.8 x 3.1
- Outputs for left and right indicator, driving light, rotating light (2 outputs alternating)
DATA SHEETCIRCUIT DIAGRAM
de
en
fr
nl
