1:87 model building

3-pin JST plug with 150mm cable, wire diameter 1mm, highly flexible.

For the larger micromodels this small slide switch is designed. Dimensions: 8.6 x 3.7 x 4 mm, 1-pole, fully encapsulated

Length: 5 mm, Material: Brass, DIN84, Contents per bag: 25 pcs.

Material: Brass, DIN84, Contents per bag: 25 pcs.

Magnetic band optimally assumes the guidance of your wire-operated vehicles. The pick-ups for the steering can be bent slightly upward in order to suspend them approximately 1 mm over the driving band. However, the vehicles still follow the band as though they are on rails. Marks from the pick-ups on the roadway are now a thing of the past. A true improvement to your system. Dimensions of the band: 1 mm high, 3 mm wide,Length per unit: 1 m x 10 units.

MXO radio receiver module, 2.4 GHz, for DSM2 and DSMX with the smallest dimensions.

The  Soldering tip with a chisel tip form it is particularly suitable for larger soldering joints and smaller brass work.

A real all-rounder at a small price. Micromotor, Diameter / length (mm): 7 x 15, Weight (g): 2.6, Rated voltage (V) : 3.7

The M700L micromotor is ideal for micro-gear construction and everything to do with movement in 1:87 scale model making. Shaft diameter: 1 mm, idle speed (rpm): 15000, voltage range (V) : 0.3 - 4

The M708 micromotor is ideal for micro-gear construction and everything to do with movement in 1:87 scale model making. Shaft diameter: 0.8 mm, speed at nominal voltage (rpm): 15000, voltage range (V) : 0.3 - 4

With this kit, the construction of a simple worm gear for e.g. the drive of a vehicle of the car system or a RC model in 1:87 scale a breeze. Dimensions: 8 x 12.5 x 24, voltage range: 0.5 - 4.8 volts

Drive for 1:87 tractors, mowers and other slow moving vehicles. Transmission ratio: 1:494. Dimension: 22 x 12 x 9 mm, 4.5 grams, ready assembled.

Screw made of brass, module M0.2, internal hole 1 mm, length approx. 3.5 mm, diameter: 2.8 mm

This linear servo has been designed with the smallest dimensions. Weighing only 1.5 grams and having dimensions of 19 x 15 x 7 mm, the servo fits in the smallest models. Number of parts: 5

With tires and rims, spur width: approx. 16.5 mm (distance between the center points of the tires). For car and RC systems.

This small compact lithium-polymer battery with 150mAh and deep discharge protection is perfectly suitable for 1:87 scale articulated lorries, transporters and other small vehicles.

Flexible black wire, 10 m, diameter: 0.6 mm

3-pin JST socket, upright, 2-unit set

For the larger micromodels, this switch is designed. It can be easily operated by its larger design and still hide easily in the model.

Length: 10 mm, Material: Brass, DIN84, Contents per bag: 25 pcs.