1:87 model building

Thanks to the extremely small dimensions of only 3 x 1 x 1.5 mm and a pitch of 1 mm, plug-in connections can be realized in the smallest of spaces. Whether as a wagon coupling (electric) or power supply lines.

Cool white LED 0603 with soldered-on cable and soldered-on resistor for 3.7 - 4.8 V, Cable length: approx. 20 cm.

1 x cool white LED, LED0402 wired, without resistor

 100 g universal solder, lead-free, 1 mm

The motor is ideal for solar cells and all applications that have to do with little power. Voltage range: 0.18 - 6 Volt, speed: 6000 rpm, axle length: 6 mm

For the most extreme forces; reduction 1:298, rpm: 5 - 75, weight: 8 grams, dimensions 25 x 12 x 10 mm.

For the most extreme forces; reduction 1:298, rpm: 5 - 75, weight: 8 grams, dimensions 25 x 12 x 10 mm.

Motor with metal gear for 2 - 18 volt operation, also ideally suited for railway transformer (DC voltage)! Extremely resilient and durable due to metal gears!  Gear ratio: 1:298, speed r/m (2 - 18 V): 8-80. Set of 5.

Motor with metal gear for 2 - 18 volt operation, also ideally suited for railway transformer (DC voltage)! Extremely resilient and durable due to metal gears!  Gear ratio: 1:298, speed r/m (2 - 18 V): 8-80  

Motor with metal gear, for extreme forces; reduction ratio 1:298, rpm: 5 - 75, weight: 8 grams, dimensions 25 x 12 x 10 mm, diameter shaft: 2 mm, voltage range: 0.5 - 6 volts , set of 5

Motor with metal gear, for extreme forces; reduction 1:298, rpm: 5 - 75, weight: 8 grams, dimensions 25 x 12 x 10 mm, diameter shaft: 2 mm, voltage range: 0,5 - 6 Volt

Steel worm, module M0.2, inner bore 1.5 mm, length approx. 3.5 mm, diameter: 2.8 mm

Reed contact, set of 10. Reed contact 1 x UM, 500 mA max., Length (glass body): 13.5 mm, diameter: 2.4 mm. Also for wire-guided vehicles H0! Switching is always possible, whether it be to trigger special functions or to switch off a micromodel with magnets.

Full rubber tyres for terrain use, 4-unit set, for B10 / B6 / B4 rims, 13 mm outside, width 4 mm.

Thanks to the extremely small dimensions of only 4 x 1 x 1.5 mm and a pitch of 1 mm, plug-in connections can be realized in the smallest of spaces. Whether as a wagon coupling (electric) or power supply lines.

Green LED 0603 with soldered-on cable and soldered-on resistor for 3.7 - 4.8 V, Cable length: approx. 20 cm.

1 x warm white LED, LED0402 wired, without resistor

Motor mount (spring steel clip) for RF300, for diameter 23-28 mm

When you need a drive for the smallest vehicles or the finest special functions, this geared motor makes an outstanding choice.

When you need a drive for the smallest vehicles or the finest special functions, this geared motor makes an outstanding choice.